Homemade water softener in rural areas Go to a treasure and buy two filter-filled shells,The best with filter cotton at both ends,Or use a few layers of gauze at both ends of the shell to prevent leakage,A joint with four points and two points,One liter of special resin for softening water,A kilo of activated carbon,A two-point faucet,A two-point hose that can be cut short as needed,The store should send you four two-point joints,Connect both ends of the filled shell.First, put activated carbon and resin into the filling Shell respectively,Wrap the joints of four to two around the raw material belt,Screw to the four-point water pipe connected,According to actual needs,Cut a two-part hose,Filling shell with resin,Then connect the filler shell with activated carbon,Finally connected to the second tap.Install the water,And then five or six minutes,Just don't see the black powder.Regular replacement of activated carbon and resin according to local water quality.
The difference between separator and filter? 5 To some extent, it is the same. the filter also uses a variety of mixed media as a reference, and separates different media according to the set value, the separator is Cyclone separation, mechanical; the filter is filter, condensed; the filter is the general name of all products in the filtration industry, and the filter is divided into many kinds, it includes the separator that separates two or more substances by gravity or the properties of the substance itself. the filter uses the medium to filter the solute in the solution. personal opinion.