What about the production flow for insulated glass unit online in JinYi?
2019-09-05
Which great God knows how to clean the fish tank rain filter? 1. remove the filter from the water or disconnect the power supply of the filter when doing any maintenance.2. regular cleaning/replacement of filter cotton and activated carbon is a necessary condition to ensure effective filtration: filter cotton can be removed from the bottom cover for cleaning or replacement,The plastic box where activated carbon is placed can also easily draw out the activated carbon in the plastic charcoal box at the other end of the filter cover. Usually, only one filter cotton can be used after cleaning and then two to three times,The Flushing filter material is best to use the water used in the aquarium or the micro-temperature tap water,To protect the beneficial bacteria group inside the filter.The rotor can be easily removed from the water cavity. Please note that the cleaning of the rotor must not use cleaning agents with resistance or corrosion.1. the filter can only be used according to the rated voltag

JinYi Safety Energy-saving Glass Co.,Ltd is dedicated to providing professional, efficient and economical solutions for customers, so as to meet their needs to the greatest extent. tempered glass panels produced by JinYi is applied to the following industries. We have many years of experience in production and sales. And if you are interested in our products, feel free to contact us. JinYi has created a number of successful series, and laminated security glass is one of them.

Fish tank filtration: how to connect the front non-power filter bucket to the rear power filter bucket? Connect the water of the inlet pipe to the inlet of the pre-powered bucket, connect the water from the outlet of the pre-powered bucket to the inlet of the main filter bucket (with pump), and then the main filter bucket (with pump) the outlet is connected to the water outlet of the fish tank.So you said that the water from the power bucket is connected to the water from the power bucket, and then the water from the power bucket to the fish tank is wrong.Why do you call the front non-power bucket? it is because the correct use is to put it in front of the main bucket.The main function of the pre-power filter bucket is to physically block large impurities, and the main filter bucket is for biological filtration.If you have high requirements for water quality or high breeding density, you need two filtration systems. Then they operate independently. In addition to the above-mentioned set of two barrels in
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...