how to install an acrylic shower unit

by:JinYi     2020-03-29
I used tiles in the shower.
Hard to clean, I love the stylish look of some modern acrylic shower equipment.
I want to do this work myself, so DIY is needed for installation-friendly.
What are you doing with these simple experiences?
Shower facilities?
Can you share some installation tips so I won\'t do that? —Alice W.
Xenia of Xenoi can hear your loud and clear voice about tile care.
When I was young, I seemed to have enough energy to fight with clean tiles and mud.
I did find a few years ago that using powder oxygen bleach can make the job easier and taste smaller, but I don\'t need to deal with the problem of cleaning the tiles anymore, because I have changed all the showers in my home to acrylic.
I have installed countless acrylic bathtubs and showers over the years as I have been a plumber since I was 30 years old.
I found a lot, to say the least.
The best news is that the overall quality and design of some units have made great progress.
A few years ago, acrylic shower equipment was often difficult to install, and the shower equipment designed for renovation was monotonous and tedious.
Just last year, I installed an amazing acrylic niche shower in my basement bathroom, 60 inch wide and a simulated tile pattern formed on the side panel.
I like the building here.
Molded shelves for soap, shampoo and Shaver.
This device is very easy to install.
Many of the available acrylic showers today have their own stylish shower doors and it will be perfect for you if you follow all the instructions.
I installed a frameless clear tempered glass shower door on the corner shower unit of my own main bathroom.
You would think it would be difficult to use a glass panel, but it would not be difficult at all.
The acrylic shower system on the market is very different.
While they may all look the same or similar in the showroom, you need to compare the plastic material and look at what\'s behind the panel to distinguish the difference.
The unit I installed in the basement bathroom last year used a proprietary solid composite made of resin, fiberglass and filler.
It is very durable and much harder than the acrylic material I recently installed in the main bathroom.
My basement bathroom niche shower unit does not require any additional wall nails as on the back of the composite fiberglass wall there are reinforced fins like Micro I-beams.
Believe me, the walls are very hard and not bent at all.
On the other hand, three-
A corner acrylic shower I just installed for my wife in our main bathroom is made of a thinner acrylic, no fins, need some strategically placed wall nails to support
The unit also requires you to use a special bathtub
The surround adhesive helps to secure the wall panels on the columns so they don\'t bend back and forth like the bottom of the old oil tank.
Here are the most important precautions when using acrylic shower equipment.
You can\'t make mistakes at any stage.
Some errors can cost you a lot of extra money if you have to buy a new panel.
Download and carefully read the written installation instructions before purchasing the shower device.
If you have the skills and tools you need to install that particular unit, please make your own judgment.
Pay close attention to the requirements of the wall frame and consider how to ensure that all the wall nails in the side nail fins and faucet positions are in the required position.
Most DIYers made a serious mistake in installing the shower base.
This part is of great concern in written instructions.
Almost all units require the base to be placed in some sort of wet plaster or mortar.
More importantly, if you are installing the factory, the shower base must be at the perfect level in all directions, which is absolutely important-
Shower door kit available.
The reason the base has to be fixed with wet plaster is that the bottom of the shower does not move when you stand at the bottom of the shower.
If the acrylic is bent, it will eventually crack and you will get a leak.
Over the years, I found out that I used dry-
Set the joint compound set up within 90 minutes.
I mixed it together so this is the consistency of the warm cake icing.
The wall post on the edge of the shower door to be installed must be completely vertical.
Don\'t ignore this step because you pay the price when you go to install the shower door at the end of your work.
You can\'t grind, trim or change the size of tempered glass!
When cutting the holes in the shower faucet, the novice often destroys the acrylic wall panel.
Errors may be based on poor measurement skills.
Remember, you can zoom in a hole, but you can\'t zoom in a hole.
I found it better to cut this hole with a high knife.
Speed spiral saw.
This is an affordable tool that drywall installers have been using for decades to cut holes for the drywall of the electric box.
The drill bits attached to these tools have cutting edges on the side of the drill bit.
You drill a little 1/4-
The inches hole on the acrylic panel, insert the drill bit, open the saw, and then move slowly in the counter-clockwise direction to cut. Need an answer?
All of Tim\'s past columns have been archived free of charge at www. AsktheBuilder. com.
You can also watch hundreds of videos, download Quick Start Guides, and more.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...