What are the types of liquid filters? High pressure pipeline filter (A): Located on the outlet pipe of the pump, it has the function of protecting pollutants from entering the system. Therefore, the concentration of pollutants in the system can be controlled. However, because it is a high-pressure supervisor, it must be affected by the pulse and pressure of the pump, so the material and strength of the filter element should be carefully considered.1. air filter: Located on the fuel tank, it has the ability to prevent pollutants from mixing with air due to the change of fuel quantity in the fuel tank. Therefore, the filtering accuracy should have the same performance as the filter, and the capacity should be left with sufficient room to prevent the internal pressure of the tank from becoming negative pressure due to hole blocking, causing the hole phenomenon of the pump. Pay special attention when the surrounding environment is bad.2. high-pressure pipeline filter (A): It is located on the outlet pipe o
Can the center of the high-efficiency filter cover be used as a measurement point for wind speed? The center of the high-efficiency filter outer cover can be used as a measurement point for wind speed.Efficient filters are mainly used to capture 0.Particle dust and various suspended matter below 5um,Filter as the end of various filter systems.The filter material is made of ultra-fine glass fiber paper,Sheet paper, aluminum foil and other materials are folded as split plates,Sealing of new polyurethane sealant,It is made of galvanized sheet, stainless steel plate and aluminum alloy profile as outer frame.The center of the high-efficiency filter outer cover can be used as a measurement point for wind speed;Generally, when measuring wind speed, it is a few points in the four corners and an intermediate point;Rfilter usually detects the effect of the high-efficiency filter installation for the hundred-class clean room,This is the way to test,No problem.