Any further technical information about JinYi?
How to clean the dust-free workshop and what to pay attention Dust-free space cleaning requirements (1) Clean clean room clean cloth should be used when cleaning the walls of the clean room;(2) configure the cleaner with 90% de-ionic water and 10% alcohol;(3) use of the approved special detergent for clean rooms;(4) Check the garbage bins in the workshop and the preparation room every day,And clear away in time.(5) dust should be vacuumed on each floor.Every time I shift,All work completion should be indicated on the map,For example, where to end and where to start.(6) special mop should be used to clean the ground of the clean room.(7), vacuuming in a clean room should use a special vacuum cleaner with an efficient filter.(8) all doors need to be checked and dried (9), and then wiped after sucking the ground.Wipe the wall once a week.(10) dust and wipe under the overhead floor.(11) wipe the pillars and support columns under the overhead floor once every three months.(12) be sure to remember when working,Will

JinYi Safety Energy-saving Glass Co.,Ltd has developed the business in a brand-new way and has won many honorary qualifications in the industry. Now we enjoy a large influence in the industry. JinYi is located at the intersection of different highways. The great geographic location, traffic convenience, and easy distribution make it an ideal place for the sustainable development of the enterprise. JinYi could customize comprehensive and efficient solutions according to customers' different needs. We can design and manufacture cost-effective exactly pursuant to your requirements.

Can the method of using water to make the filter not blocked? Membrane filtration method, generally, uses a specific semi-permeable membrane, which can only pass through the membrane with water or only pollutants, thus achieving the method of separating pollutants.Homemade sewage filterTools: cups, mineral water bottles, scissors, cloth, crushed stones, sand, soil, tap water, activated carbonSteps1. wrap the bottom of the cut mineral water bottle with a piece of cloth, put a plastic cup under the cloth, and make a simple funnel. It should be noted here that the cloth gap at one end of the mineral water bottle should not be too large. if the gap is large, the cloth can be stacked into two or three layers. Because this cloth is also one of the key factors that can filter.2. Spread the filter material into the container, that is, the mineral water bottle. The first layer on the bottom is paved with a few centimeters thick gravel layer, which is to prevent the sand from flowing out of the bottom of the co
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...